‘Dating Medal’ for ‘Con Decorados’

A couple of weeks ago I was invited to make a piece for an exhibition in Valencia, Spain called ‘Con-Decorados’. The exhibition will be part of a row of shows accompanying the second opening of the ‘Schmuck‘ show from Munich in Valencia. It will be held at the ‘Museo Nacional de Ceramica y de las Artes Suntuarias Gonzalez Marti‘, as part of the celebrations of the 10th anniversary of the Jewellery Department at the ‘Escola d’Art i Superior de Disseny de València’ EASD. To mark this anniversary, the school has organised a programme of activities, exhibitions and talks on contemporary jewellery and called the event  ‘MELTING POINT 2012’. ‘Con-Decorados’ will open on the 5th of May at 6pm. To visit the blog accompanying the activities, click here.

The topic of ‘Con-Decorados’ turns around the subject of medals. 23 artists were asked to work with and around the idea of interpreting and creating a medal.

The artists who will participate in this exhibition are:

Peter Bauhuis
Mirei Takeuchi
Sung-Ho Cho
Volker Atrops
Jorge Manilla
Christine Graf
Lisa Juen
Alexander Friedrich
Tabea Reulecke
Rodrigo Acosta
Marie Pendaries
Carlos Pastor
Kepa Karmona
Sarah O´Hana
Kerstin Östberg
Elvira H.Mateu
Edu Tarín
Ramón Puig
Silvia Walz
Grego Garcia
Mauricio Lavayén
Gemma Draper
Mariona Piris
My idea for my medal came from personal experience. I wanted to create a medal that is a witness of our time, a medal that can be worn and used for a purpose of today.
Until I met my partner, I was a single woman in Shanghai for a very long time and I had to learn the hard way that dating can be really hard work that should be awarded a medal! So… here it is, the ‘Dating Medal’.
…and a short explanation:

Modern society does not make it easy to meet one’s ‘better half’. The Internet, Hollywood and the fast pace of a steadily growing throw-away-culture heightens the bars of expectation when it comes to choosing the right partner.

How can one meet this person without having to bend over backwards?

Dating in the mentioned conditions can be really hard work, especially for girls. The ‘Dating Medal’ is to be a helping device for women dating but is also act as a dating award.

The brooch holds two LED screens: one in green and one in red.

The screens are connected to an ON/ON switch, which enables the wearer to decide which of the two screens is going to light up.

In the case of the lady meeting an individual of interest, the green screen can be lit reading:

 ‘Did the sun come out or did you just smile at me?’ 

The sentence can act as an ‘ice-breaker’ leading into a conversation. In the case of the initial chat being a success, the gentleman can take the lady’s contact details written on small paper-strips hanging from the series of brooch-hooks. If he would like to leave his details, he can choose to take one of the plain paper-strips and write down his contact information with the attached pencil. By hanging the written strip back on the hook ‘rewards’ the girl with the possibility of a future date.

In the case of the lady not feeling attracted to an approaching individual, the red screen can be lit reading:

 ‘Save your breath.’

In this case, a lot of drama and heartbreak can be prevented right from the start.

Not just my dating experience was a little rocky but the way of making the brooch was pretty painful too. Just when I was about to finish the brooch, a piece of the bearing broke off. Since the metal part is entirely cut and bent from one piece of stainless steel sheet, I had to remake the entire brooch.

Here are some pictures I took along the way that show the process of making.

Polishing. Even after almost 10 years of making professional jewellery, the contrast of dirty hands and shiny metal still amazes me! It feels great looking like a pig but holding this precious little something in one’s hands!

Before bending.

Wiring.

I hope you like the ‘Dating Medal’ and the journey of its making. If you should be in Valencia around the 5th of May, please feel free to join the exhibition opening. The show will be on until the end of June.

If you can find a chance to go, please take a picture of the piece and send it to me! I would love to see it on display! Enjoy the show!

Advertisements

‘XinCheJian’ Hacker-Space Shanghai

Yesterday night I was invited to visit the studio of XinCheJian, the first real Hacker-Space/Maker-Space in Shanghai, China. On Wednesdays, they usually host several speakers to come and talk to the community about their projects. Min Lin, the Co-Founder of the space got in touch with me to inquire if I would be happy to give a talk about ProonK at some point too, since she thought that the electronic components being ‘wrapped-up’ in an art & design concept would be a great topic to present. So, I went there with my boyfriend last night to check out the space and see the format of their presentation-nights.

Usually, they try to invite two to three speakers to come and talk but last night, there was only one. A very nice American young man, who was very handy on the guitar, introduced us to the workings and wonders of Apple’s Garage Band. It was an interesting little presentation about the making of music, based on traditional means being introduced to the world of computers. Pretty impressive program actually!

After the presentation, Min Lin gave us a tour around the space, which was seriously impressive! Before I went there, I had no idea about hacker-spaces and how their concepts worked but I felt like having entered paradise! I have to admit that I am a little bit of a fiddling and making geek myself, although my making knowledge in the electronics area is still pretty limited. I learned that XinCheJian also offers workshops for the public to attend on the weekends. I am SO going to test the waters in the near future!

The studio space.

Min Lin also showed us some of the projects some members work/worked on, such as…

…little robots, which are built for a race that takes place every four weeks in the studio…

…a little robot that is connected to a web-cam, showing real-life scenes on the web…

…a moody tree, which frequently tells you to hug and love it more when it starts to feel neglected…

…an arcade machine that is built from a TV screen located in the bottom of the construction and a mirror that reflects the image of the TV screen onto the viewing area…

…a high-tech mouse-trap ‘The Ratmotel’ , which is equipped with a sensor to lock the door once the mouse is in…

…this one made me laugh quite a bit, the ‘Useless Machine’ that once you pushed the switch has a mechanical finger coming up to push it back in the starting position and the game starts all over again…

…a modified e-scooter that has a holder for a smart-phone in the front, which is connected to the machine to have it report to the driver about it’s well-being…

…and finally, for me the highlight of the night, a DIY 3D printer! How awesome is that? For a jeweller this is one of the machines that make me enter heaven! How great would it be to play with a machine like this in my studio and see what kind of things I can create for my artistic practice! Tons of new possibilities opening up in a flash! 😀

Min Lin got me even more amazed when she told me about a HK based company that offers DIY 3D printer kits for about $300+$50 international shipment!! …and there we have another addition to my workshop-wishlist!

The company is called Makibox and next to their awesome 3D printer, the MakiBox A6, they also sell other little really useful gadgets. Check out their website or follow them on Twitter @makible for more info.

When reading through the MakiBox A6 product description, I stumbled over the following:

‘We are just getting started with both the A6 and other devices that will help people build things they need. The next features we will build for the A6 are multi-color printing and plastic recycling, laser cutting and marking, and PCB routing. These new addons for the A6 will turn it into a desktop manufacturing system, not just a 3D printer.’

SERIOUSLY???? When is this going to happen?? I SO CAN’T WAIT!!!!

Another tip Min Lin gave me was to check out the website of ShapeWays, a USA based 3D-printing company, that made my day with the selection of materials they have on offer. Ceramics and Alumide!!! We’ll be in touch soon! 🙂

I guess it is pretty obvious that I went to bed last night with a HUGE smile on my face, dreaming of all the future design-possibilities ahead of me!

If you would like to join my talk at XinCheJian, please come around, possibly on the 18th of April (yet to be confirmed) at 7pm. I guess the studio might have moved to the new location by then, down Wulumuqi Lu, Chang Le Lu. I am pretty excited to see the new space and I can’t wait to attend the workshop with Mitch Altman soon! See you there!

www.proonk.com, www.lisa-juen.com; Please follow my blog or join me on Twitter and Facebook. Thank you!